Cayenne Titanium (9PA) V8-4.5L (2006)
/v8-4.5l/Page-648003.png)
7. Lift the cover at the front edge and slide the ignition coil cover of the second cylinder out of the torque support bracket. Pull out cover to the front.
8. Remove torque arm bracket. To do so, undo the four fastening screws and set bracket aside.
Removing design cover of cylinder bank 5 - 8
INFORMATION: Place a cloth between secondary air pump and design cover to avoid scratching the cover.
1. Unscrew the four fastening screws on the ignition coil cover.
2. Remove design cover of cylinder bank 5 - 8. To do this, lift the cover slightly with both hands at the edge pointing towards the intake system until
it is released from its holder.
