Cayenne Titanium (9PA) V8-4.5L (2006)
/v8-4.5l/Page-69003.png)
INFORMATION: Only for vehicles with auxiliary battery
8. Release the cover -arrows A- and open it -arrow B-.
9. Screw off the fastening nut -arrow 3- and remove the line for the additional battery -arrow C-.
10. Unclip the cover from the power distributor using a screwdriver -arrow a-.
11. Carefully prise out the locking mechanism on the electric connector -1- with a screwdriver -arrow a- and pull the connector out of the cutoff relay
-2-.
12. Screw off the two fastening nuts -3- on the cutoff relay -2- and remove the cutoff relay.
Installing cutoff relay
Installing pyrotechnical cutoff relay
INFORMATION: Use new nuts.
