porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Removing and Installing Control Unit For Off-Road Stabilizer|Page 577 > < Removing and Installing Control Unit For Off-Road Stabilizer|Page 575
Page 2
background image

Overview of level control module

1. Remove the cover of the right rear side section trim.
2. Remove warning triangle and emergency kit.
3. Pull up the clip of the control module holder and tilt the control module out of the holder.

Pull plug off at the top of the level control module.

4. Pull the latch of the upper electrical plug upwards -a- and remove plug.
5. Pull out control module and pull the latch on the electrical plug -a- and remove plug.

Pull plug off at the bottom of the level control module.

Installing the level control module

1. First place the smaller plug on the control module and slide in the latch -a-.

Push plug on at the bottom of the level control module.

2. Position the control module in the installation position and insert the second plug on the control module and lock it -a-.

Removing and Installing Control Unit For Off-Road Stabilizer|Page 577 > < Removing and Installing Control Unit For Off-Road Stabilizer|Page 575