Cayenne Titanium (9PA) V8-4.5L (2006)
/v8-4.5l/Page-121004.png)
Connecting and locking the connectors
3. Place the support with the two control units in installation position -C-.
4. Move seat all the way back and tighten the support with the fastening screw.
Tightening fastening screw
5. If the Tiptronic control unit is replaced, observe the points under coding the control unit.
Information:
^
Only for vehicles with telephone
Tightening fastening nuts
6. Position the support for the telephone control unit and screw down using the three fastening nuts.
Coding Tiptronic control unit
Information:
^
The adaptation values must be reset using the PIWIS Tester 9718 when the transmission is renewed/replaced.
^
If a new control unit is installed, it must adapt first. Poor shifting quality can therefore be expected in the adaptation phase.
