porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Removing and Installing Rear Adjustment Fitting|Page 6985 > < Removing and Installing Rear Adjustment Fitting|Page 6983
Page 6
background image

7. Position the support in installation position -arrow- and secure with the fastening nuts -arrows 3-.  Tightening torque: 6.0 ft lb

NOTE:  Once the fastening nut has been tightened, the deflection lug must level out on its own in a vertical position or in the relevant support
direction.

NOTE:  Once the fastening nut has been tightened, the deflection lug must level out on its own in a vertical position or in the relevant support
direction.

8. Tighten the deflection lug on the adjustment fitting with the fastening nut -arrow 2-.  Tightening torque: 37 ft lb.

Removing and Installing Rear Adjustment Fitting|Page 6985 > < Removing and Installing Rear Adjustment Fitting|Page 6983