Cayenne Titanium (9PA) V8-4.5L (2006)
/v8-4.5l/Page-1522002.png)
-
Every ignition circuit for all airbag modules and belt tensioners must be ignited individually.
-
Persons possibly affected must be informed of the resulting noise beforehand.
-
Use ear protectors.
-
Maintain a safety distance by utilizing the entire cable length of the ignition tool.
-
Connect power source only immediately prior to triggering.
-
Choose a place in front of the vehicle. This also applies to persons not involved.
-
Perform ignition with the doors closed and the side windows open.
-
Do not approach the vehicle until after a waiting period (approx. 3 minutes) if ignition fails.
-
Allow airbag units to cool down under observation following ignition.
-
Avoid skin contact with ignited airbag units.
Tools and materials
Connecting ignition tool
ATTENTION:
Danger of injury and material damage if airbag units are not handled correctly.
-
Remove ignition key. Disconnect battery . Route or isolate ground strap so that all contact with a ground carrier (e.g. body, seat frame) is avoided.
-
After the battery is disconnected, always wait for 1 minute before disconnecting the airbag plugs.
Driver's side
ATTENTION:
Danger of injury.
-
This is a two-stage airbag module which must be ignited separately.
1. Remove steering column trim.
