Cayenne Titanium (9PA) V8-4.5L (2006)
/v8-4.5l/Page-160002.png)
Overview of combination sensor
Combination sensor under the center console (cup holder)
1. Disconnect battery.
2. Remove center console cover and cup holder.
3. Remove triggering unit for airbag.
General warning notes
Warning notes
Warning:
Combination sensor not calibrated or calibrated incorrectly
^
Unexpected vehicle handling
^
Combination sensor does not function
^
Malfunction in combination sensor
-> After installing or replacing the combination sensor, calibrate it using the PIWIS Tester 9718.
-> Only perform calibration when the vehicle is positioned horizontally and the brake is not actuated.
Replacing combination sensor
Separate the cross bar of the carpet -arrow - Underneath is the combination sensor.
