porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Removing and Installing Central Electrical System Power Distributor|Page 5366 > < Removing and Installing Central Electrical System Power Distributor|Page 5364
Page 7
background image

16. Push connector onto air flow sensor -Arrow A- until locking tab -B- is felt to engage.

17. Place charge relay on threaded bolts -Arrow A- and tighten using new fastening nuts. -7- - Tightening torque: 3.5 ftlb..
18. Place contact bridges on threaded bolts -Arrows B- and tighten using new fastening nuts -6- - Tightening torque: 6 ftlb..
19. Place fuse element on threaded bolts -Arrow C- and tighten using new fastening nuts. -4- - Tightening torque: 15 ftlb..
20. Place fuse element on threaded bolts -Arrow D- and tighten using new fastening nuts. -5- - Tightening torque: 3.5 ftlb..

21. Push in cover of power distributor from front to back -Arrow A- and press on -Arrow B- until the latch engages.

INFORMATION:  Only for vehicles with auxiliary battery

22. Push line for auxiliary battery onto threaded bolt -Arrow A- and screw down with fastening nut -3- - Tightening torque: 15 ftlb.
23. Close the cover -Arrow B- until locking tabs are felt to engage.

Removing and Installing Central Electrical System Power Distributor|Page 5366 > < Removing and Installing Central Electrical System Power Distributor|Page 5364