Cayenne Titanium (9PA) V8-4.5L (2006)
3. Open cover -Arrow A-
4. Undo fastening nut -3- and remove B+ line from threaded bolt -Arrow B-
5. Undo fastening screws -4- and remove external power connection upwards -Arrow C-.
Installing wiring harness for starter battery
1. Insert external power connection -Arrow A- and tighten with fastening screws -4-.
2. Place B+ line on bottom of external power connection -Arrow B- and tighten with fastening nut -3-.
3. Close cap -Arrow C- until locking tab is felt to engage.
4. Open cap -a- for B+ threaded joint.
5. Fit front B+ line -Arrow A- and tighten with fastening nut -1-.
6. Fit rear B+ line -Arrow B- and tighten with fastening nut -2-.
7. Close cap -a- until locking tab is felt to engage.
Subsequent work
1. Install front left covers (engine compartment).
2. Connect battery ground strap and carry out work instructions after disconnecting the battery.