Cayenne Titanium (9PA) V8-4.5L (2006)
/v8-4.5l/Page-1303006.png)
Arrangement of tools for pressing out hydraulic/rubber-metal mounts
Pressing in
Tools for pressing in hydraulic/rubber-metal mounts
^
T10230/2
^
T10230/11
^
T10230/12
^
T10230/14
^
T10230/15
Information:
When using the pressure pieces, the direction arrow shows the direction for pressing the rubber-metal mounts in or out on the trailing arm.
Information:
When pressing the mounts in, make sure that pressure piece 11, in particular, is positioned correctly. Pressure piece 11 must not cover up the bore for
the bearing in the control arm!
The pressure pieces are used as follows
