Cayenne Titanium (9PA) V8-4.5L (2006)
/v8-4.5l/Page-1304005.png)
^
T10230/3
^
T10230/4
^
T10230/5
^
T10230/6
^
T10230/7
^
T10230/13
^
T10230/14
^
T10230/15
The pressure pieces -see figure- are used as follows:
Get a second worker to help when working on the wheel bearing housing.
6. Position the tubular piston cylinder -see figure- and pre-tension slightly to prevent the pressure pieces from slipping out of place. Check the
position of the pressure pieces again.
7. The pressure piece must be positioned correctly on the contact surfaces of the wheel bearing housing. The cut-out in the pressure piece -arrow-
should be used as a viewing window. Now press the bearing out carefully. When doing so, stand to the side of the tubular piston cylinder and make
sure that the tubular piston cylinder cannot fall down.
