Cayenne Titanium (9PA) V8-4.5L (2006)
/v8-4.5l/Page-1339002.png)
Air-spring strut at rear
1. To bleed the leveling system (compressed air must be released from the system), use the Porsche System Tester. To do this, select the Bleed
leveling system menu item in the Leveling system.
2. Fit protective tube on drive shaft (shop-made to protect the drive shaft).
3. Loosen pressure line on residual pressure retaining valve -arrow- using insert part T10212 (front spring strut connection in figure). Then, unclip
the pressure line from the holders and set it aside.
4. Remove stone guard for CDC sensor -arrow-.
