Cayenne Titanium (9PA) V8-4.5L (2006)
Caution:
Increased risk of accidents due to spring tensioning.
^
Danger of injury and damage from springs jumping out.
-> Never use an impact bolter to loosen or tighten the lock nut.
-> Use a commercially available changeover ratchet.
1. Position the bottom support and bottom spring retainer assembly at the correct position on the shock absorber.
2. Position the pre-tensioned coil spring precisely at the stop in the bottom concave washer -arrow-.
Coil spring stop in bottom concave washer
3. Slide the protective sleeve/stop buffer/cap assembly loosely onto the piston rod.
4. Position the top mount plate assembly -1- with the top support -2-.
Fitting top concave washer with top support
-
Position the top spring plate -arrow- precisely at the coil spring stop.
Top spring plate stop at coil spring