Cayenne Titanium (9PA) V8-4.5L (2006)
/v8-4.5l/Page-907002.png)
Control unit fastening screws
Subsequent work
Subsequent work for electrohydraulic control mechanism
1. Install pipe set in transmission.
2. Unscrew ATF control screw -A- and fill in ATF until a constant discharge is visible at the lifting tube.
Check screw and oil drain plug
3. Screw in ATF inspection plug -A- with new sealing ring. -> Tightening torque: 52 ftlb.
4. Check and if necessary, top up the ATF.
