Cayenne Titanium (9PA) V8-4.5L (2006)
Tools
Disassembling drive shaft
Caution:
Increased risk of accidents during disassembly work from failing parts.
^
Danger of injury and damage.
-> Watch out for falling parts.
-> Get another worker to help.
The joint on the transmission side and joint pin on the wheel side of the front axle can be replaced. The entire drive shaft must be replaced if the
profile shaft is defective.
1. Remove cap from inner joint -arrow-.
Removing cap
2. Remove circlip using circlip pliers NR.68.
3. Remove clamp and hose clamp at the boot -arrows-. If you intend to re-use the boot, make sure not to damage it.