Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
3. Coat the rubber sleeve with soap suds and pull in -arrow A- , until this is felt to engage in the opening -arrow B-.
4. Push on the receiver antenna connector for the auxiliary heater -arrow A-, until the connector -arrow B- is felt to engage.
5. Push on the receiver connector for the auxiliary heater -arrow C- , until the connector -arrow D- is felt to engage.
6. Screw down the receiver for the auxiliary heater using the fastening screws -1-.
INFORMATION: The number of plugs can vary, depending on the vehicle equipment.
7. Push the connectors of the antenna leads in the sockets of the same colour -arrows A- until the connectors -arrow B- are felt to engage.
8. Press the plug connections for the antenna leads into the brackets -arrows C- until the lugs -arrows D- are felt to engage.
9. Insert the socket into the support for the socket -arrow A-, until the connectors -arrows B- are felt to engage.
10. Insert the lines for the left rear spoiler into the support for the socket -arrow C-.
11. Close the support -arrow D- until the locking tab -arrow E- is felt to engage.