Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Part 9
MMI Identification
MMI Identification
The diagnosis software number and the part number for the PCM2 can be read out under this menu item.
1. Connect and start the 9588 Porsche System Tester II and switch on the ignition.
2. Select 'Cayenne' in the Vehicle type menu and confirm with the >> key.
3. Select 'PCM2' in the Control modules menu and confirm with the >> key.
4. Select 'PCM2 MMI' in the Cayenne PCM2 function selection menu and confirm with the >> key
5. Select 'Identification' in the Cayenne PCM2 GW function selection menu and confirm with the >> key.
6. "Diagnosis software number; PCM2 part number." appears on the display
7. "Extended identification" can be called up on the display with the F8 key.
MMI Input Signals
MMI Input Signals
The following queries can be run using this menu item:
-
left/right rotation indicator
-
Key code
NOTE: Deactivate the 'automatic traffic announcement' before performing the diagnosis on the PCM2. If this is not done, the diagnosis will abort
(applies only to software version number < 03).