Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
7. Route oxygen sensor cables upwards so that the oxygen sensor cables are not touching the exhaust manifold or the exhaust system and clip them
into position -1-. A piece of wire with a hook on it is very useful here.
8. Connect the oxygen sensor connectors for the oxygen sensors at the water splash panel and clip the cables into the holders.
Subsequent work
Subsequent work for installing primary catalytic converter on cylinder bank 1-4
1. Install main catalytic converter.
2. Fit engine compartment cover above the oxygen sensor connectors.
Subsequent work for installing primary catalytic converter on cylinder bank 5-8
1. Install main catalytic converter.
2. Fit engine compartment cover above the oxygen sensor connectors.