Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Hose/Line HVAC: Service and Repair
Removing and Installing Compressor-Condenser Line
Removing And Installing Compressor-Condenser Line
Technical values
Preliminary work
Remove engine guard.
Removing the compressor-condenser line (A - B)
CAUTION:
Danger of injury from contact with the refrigerant
-
Observe safety regulations when working with refrigerant.
INFORMATION: Removal and installation is described for a Turbo vehicle. There is additional hosing on the graphics which is not installed on the
naturally-aspirated engine.
1. Remove refrigerant by suction.
2. Unscrew fastening screw of the refrigerant line -A- on the condenser for the compressor.
3. Disconnect the refrigerant line.