Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
3. -A- Using a slide hammer kit NR.168, push plug down and turn Seeger ring until accessible from air filter.
4. Using Seeger ring pliers NR.70 remove Seeger ring -B-.
5. Screw hexagonal screw into plug and pull plug out in upward direction using slide hammer set NR.168.
6. Lift dryer out in upward direction.
Installing desiccator
INFORMATION:
-
The dryer must be replaced if the system suffers from operational faults (e.g. accident damage or air-conditioning system depressurised).
-
Used refrigerant oil extracted from a previously run A/C unit must not be re-used.
1. Replace O-ring on plug and wet with refrigerant oil.
2. Push dryer into condenser.