Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Wiper Arm: Service and Repair
Removing and Installing Wiper Arm
Removing And Installing Wiper Arm
Tools
Technical values
Removing wiper arms
CAUTION:
Danger of crushing and trapping when working on the wiper.
-
Switch off ignition and remove ignition key before working in the area of the wipers.
1. Switch off ignition and remove ignition key.
INFORMATION: When the bonnet is open the wiper system is deactivated; only after closing the bonnet and switching the wiper system off and on
again are the wipers reactivated.
2. Open the bonnet and remove the cap -1-.
3. Unscrew fastening nuts -2- and -3- and remove washer -2A- O-ring -2B-.
4. Have a second person lift the bonnet, disengage the bonnet shock absorber and open the bonnet.