Cayenne Turbo S (9PA) V8-4.5L Turbo (2006)
Fitting rear logo
INFORMATION:
-
Carefully clean any dirt, grease, wax and other impurities off the fitting area of the body using isopropanol.
-
Always use a clean cloth.
-
The room and object temperature must be at least Temperature: +18 degrees C.
-
Do not touch the adhesive surface again after removing the protective paper.
-
Press on the logo in the bonding area with a rubber roller using as much pressure as possible.
-
The parts must be allowed to bond for at least 24 hours before washing the vehicle.
1. Mark the centre of the lid.