Cayenne Turbo S (9PA) V8-4.5L Turbo (2006)
/v8-4.5l_turbo/Page-1876003.png)
-
Always position the airbag unit in such a way that the airbag opening is facing upwards.
-
If removed for an extended period, the airbag unit must be stored in a safe place.
-
Airbag units must not come into contact with grease, oil, detergents, liquids, or similar substances.
-
Do not expose airbag units to temperatures above 90 degrees C.
-
Do not remove the short-circuit spring on the plug-in contacts.
-
Ignition and preparations may only be carried out by skilled staff, supervised by a second responsible person.
-
Before disposal, the airbag unit must be rendered harmless by electrical ignition performed in accordance with all precautionary
measures, thereby preventing it from being used incorrectly.
2. Remove side air guide.
Turbo only
2.1. Unclip airbag sensor wire harness -14-.
2.2. Slide the side air guide -15- outwards and remove it.
3. Unscrew fastening screws -5-.
3.1. Unscrew fastening screws on both sides of the vehicle.
4. Screw in service fastening screws -4-.
