Cayenne Turbo S (9PA) V8-4.5L Turbo (2006)
INFORMATION:
-
Detach covering, starting from the outside of the padding.
-
Do so in the following sequence: left/right, top/bottom, middle.
4. Cut open cushion clips -a- with side cutters -1- and remove cover from padding -arrow-.
Installing cover for front backrest
Installing cover for backrest
1. Place cover on the padding -arrow- and align with contour of padding.
INFORMATION:
-
Fasten covering to the padding, starting from the middle.
-
Do so in the following sequence: middle, top/bottom, left/right.
2. Fasten cover to the padding using cushion clip pliers NR.130 -2-. Refer to Removing cover for front backrest and new cushion clips -a-.
3. Pull the retaining straps to the rear through the openings in the padding -arrow-.