porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

All Technical Service Bulletins for Suspension Control Module: > < Porsche PCM 3.0(R) - New Map Data Information|Page 8
Page 1
background image

Suspension Control Module: Customer Interest
Suspension - Clicking/Rumbling Noises

Service

52/07 ENU 4304

Active Chassis Control System PDCC

Vehicle Type:

Cayenne/Cayenne S/Cayenne Turbo (S)

Model Year:

As of 2008

Equipment:

Porsche Dynamic Chassis Control(PDCC) (I-no. OAW, EOW, 1BK)

Concerns:

Operating and running noises (clicking and/or rumbling) from the valve blocks in the PDCC system.

Information:

Clicking noises from the right front wheel housing (A-pillar area) and/or left rear wheel housing (chassis sub frame area) and rumbling noises from
around the axles are caused by operating and running noises in the PDCC system.

The clicking noises can be heard when the side windows are open, when the roof is open or even when over taking other vehicles slowly. The rumbling
noises can occur particularly when driving slowly (< 15 km/h or 10 mph) on uneven road surfaces and when the steering wheel is turned (e.g,
maneuvering, pulling into or out of a parking space).

The clicking and rumbling noises are caused by shifting action in the valve blocks in the PDCC system. These noises are produced as a result of high
system dynamics (and the resultant system pressures) and quick or alternating valve shifts.

The modified PDCC control unit will help to minimize the rumbling noises specifically.

The clicking noises are characteristic of PDCC and cannot therefore be classed as complaints.

Date of Introduction:

As of end of July 2008, a modified PDCC control unit is installed in order to prevent rumbling noises.

Remedial action for rumbling noise:

In the event of a complaint, install the modified PDCC control unit, --> Workshop Manual' 430819 Removing and installing control unit for Porsche
Dynamic Chassis Control (PDCC)'.

Parts Info:

955.618.068.02 New/ --> PDCC control unit (I-no. OAW)
955.618.068.11 New/ --> PDCC control unit (I-no. EOW, 1BK, OAW)

References: --> Workshop Manual' 430819 Removing and installing control unit for Porsche Dynamic Chassis Control (PDCC)'

Disclaimer

All Technical Service Bulletins for Suspension Control Module: > < Porsche PCM 3.0(R) - New Map Data Information|Page 8