Cayman (987) F6-2.9L (2009)
/f6-2.9l/Page-1002.png)
3. Turn the cover and control unit around.
4. -A- Pull (unclip) the gateway control unit out of the cover at the connector side.
5. -B- Pull the gateway control unit to the left out of the holder.
6. Release electric connector -A- and pull it off the gateway control unit.
Installing gateway control unit
1. Push on electric connector until it engages securely on the gateway control unit.
2. Check the seal on the cover and replace seal or cover and seal if necessary.
