Cayman (987) F6-2.9L (2009)
/f6-2.9l/Page-5001.png)
Parking Assist Control Module: Service and Repair
Removing And Installing Control Module For ParkAssist
Tools
Removing control module for ParkAssist
INFORMATION: If the ParkAssist control unit has to be replaced, the values from the control unit should first be read out using the PIWIS Tester
9718.
1. Push control unit forwards in direction of travel from behind, unclip it, detach it and turn the holder 180°.
2. Push together the retaining tabs for the control unit and pull the two catches back. Lift control unit up and out.
WARNING:
Risk of damage to electronic control modules.
