Cayman (987) F6-2.9L (2009)
/f6-2.9l/Page-11001.png)
Power Distribution Module: Service and Repair
Removing and Installing Power Distributor
Removing And Installing Power Distributor
Technical values
Preliminary work
Preliminary work for power distributor
Disconnect and cover the ground terminal on the battery.
Removing power distributor
1. Switch off ignition and remove ignition key.
2. Release the locking mechanism of the B+ line -A- and pull off the B+ connection from the power distributor -B-.
3. Unscrew the two fastening nuts -2-.
