Cayman (987) F6-2.9L (2009)
/f6-2.9l/Page-32001.png)
Control Module: Service and Repair
Removing and installing transmission control unit (PDK)
Preliminary work
1. Remove trim panel for rear luggage compartment (carpet lining) at the right.
2. If the control unit has to be replaced, the values must be read out of the PDK control unit using the PIWIS Tester 9718 before removing the
control unit.
Removing transmission control unit (PDK)
Installation position of transmission control unit (PDK)
Warning
Sudden voltage interruption of the power supply to the control module.
Destruction of the control module.
-
During programming, it is essential to guarantee the power supply for the Porsche System tester. It is essential to connect a battery charger with a
current rating of at least 40 A to the vehicle battery.
