Cayman S (987) F6-3.4L (2008)
Preliminary work
Remove rear apron. Refer to Removing and installing rear apron on "Removing"
Tools and materials
Producing assembly fixture
NOTE: The following assembly fixtures must be produced for assembly work on the rear retaining strip.
1. The following tools and materials are required for producing the assembly fixtures:
1.1. Sabre saw 00000
1.2. Measuring tape 00000
1.3. Commercially available hardwood block 00000
2. Make hardwood block for assembly fixtures -1- with the corresponding stated dimensions.
Removing the rear retaining strip