Cayman S (987) F6-3.4L (2008)
INFORMATION:
-
Push in wheel housing liner towards the outside up to contact in wing stop position.
-
Ensure that the right wheel housing liner is guided through the opening on the wheel well.
-
Route drain hose for filling the tank on the right through the right wheel housing liner.
1. Fit front wheel housing liner -A-.
2. Tighten fastening nuts -1-. Tightening torque: 1.5 Nm (1 ftlb.)
3. Tighten fastening screws -2-. Tightening torque: 2 Nm (1.5 ftlb.)
Subsequent work
Fit front wheel. Refer to Removing and installing wheel.