Cayman S (987) F6-3.4L (2008)
2. Work on top of coolant tank -1-:
2.1.
Slide on coolant hose -1-, position spring band clamp -2- between the markings -3- and fit it at this position.
2.2.
Slide on breather hose -3-, position spring band clamp -2- between the markings and fit it at this position.
2.3.
Slide on breather hose -5-, position spring band clamp -4- between the markings and fit it at this position.
2.4.
Slide on vent line until the quick-lock coupling -8- locks with an audible click.
3. Work on bottom of coolant tank:
3.1.
Fit M8 x 16 screw -3- and tighten it Tightening torque: 23 Nm (17 ftlb.)
3.2.
Slide on cable plug -2- for engine coolant level sensor until it locks with an audible click.
3.3.
Slide on coolant hose -5-, position spring band clamp -4- between the markings and fit it at this position.