Cayman S (987) F6-3.4L (2008)
4. Disconnect the two coolant hoses from the supports for the side radiator -arrows-. To do this, loosen the spring-band clamps from the front and
push them on to the supports.
5. Open up the coolant hoses at the supports using a screwdriver and allow the coolant hoses to drain -arrow-. Pull coolant hoses off the supports.
6. Remove M8 x 25 fastening screw on bracket from below at the body -arrow-.
7. Undo two M8 fastening nuts on the bracket in the wheel housing at the side wall -arrows-. Carefully remove side radiator complete with bracket to
the side. Collect remaining coolant from the hoses and side radiator. Air-conditioning condenser remains in installation position.