Cayman S (987) F6-3.4L (2008)
10. Insert eight housing screws.
10.1.
Six M6 x 35 and two M6 x 40 Torx screws for camshaft bearing and guide rail.
10.2.
Tighten screws evenly and just finger-tight.
Installing camshafts for cylinders 1-3
Caution
Risk of damage due to particles of dirt.
^
Danger of material damage due to blocked oil bores/oil ducts.
-> Absolute cleanliness is essential when working on the engine.
-> Lay removed engine parts on a clean base and make sure to cover them.
-> Use the cover for dust protection when fitting the engine NR.165 on the engine assembly support.
Note
^
Make sure that the bearing sleeve on the inlet camshaft is positioned correctly.
Note
^
Do not interchange the thrust bearings of the inlet and outlet camshafts during assembly; observe identification markings.