Cayman S (987) F6-3.4L (2008)
/f6-3.4l/Page-192006.png)
10. Push new retainer plates (with integrated seal) onto solenoid hydraulic valves. Position holder and tighten with two Torx screws (M6 x 20).
A - Holder for camshaft adjustment valve
B - Holder for valve lift adjustment valve
1 - Camshaft adjustment retainer plate
2 - Valve lift adjustment retainer plate
11. Insert ignition coils into the spark-plug recesses. Position and tighten two M6 x 25 Torx screws per ignition coil.
-> Tightening torque: 10 Nm (7.5 ftlb.)
12. Plug in cable plugs for ignition coils and solenoid hydraulic valves. Clip the cables of the hydraulic valves into the brackets.
13. Connect cable plug to oil temperature switch.
14. Clip oxygen sensor lines into brackets.
