Cayman S (987) F6-3.4L (2008)
/f6-3.4l/Page-482002.png)
2. Release both connectors -A- and unplug them.
3. Take out the control unit.
Installing vehicle electrical system control unit
1. Press electrical plugs into control unit and lock them -arrow- so they are felt to engage.
2. Push vehicle electrical system control unit upwards into the holder. It must engage properly. Make sure the electrical leads are not pinched.
Subsequent work - vehicle electrical system control unit
Attach relay carrier 1.
Coding vehicle electrical system control unit
Programming the vehicle electrical system control unit:
Reading out and printing out values
WARNING: Sudden voltage interruption of the power supply to the control module.
-
Destruction of the control module.
-
During programming, it is essential to guarantee the power supply for the Porsche System tester. It is essential to connect a battery charger with a
current rating of at least 40 A to the vehicle battery.
