Cayman S (987) F6-3.4L (2008)
/f6-3.4l/Page-527008.png)
9. Tighten fastening nut to the specified tightening torque. For PASM spring struts, counter at the stop plate using retaining tool P 9630/1. For
conventional spring struts, counter at the hexagon socket of the piston rod using special tool P 9630.
10. If present, push on clip (vibration balancer) at damper tube of vibration damper. Final assembly (tightening) only on completion of wheel carrier.
Rear Suspension
WM 427137 Disassembling and assembling rear spring strut
