Panamera S (970) V8-4.8L (2010)
/v8-4.8l/Page-853001.png)
Driver/Vehicle Information Display: Service and Repair
Removing and Installing PCM Display and Operator Control Unit
Removing And Installing PCM Display And Operator Control Unit
Tools
Technical values
Preliminary work
1. If a new control unit has to be installed, the values/coding must be read out using the 2nd generation PIWIS Tester 9818 prior to removing the
"old" DME control unit.
2. Remove the two air vents at the PCM display and operator control unit.
Removing PCM display and operator control unit
