porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Engine Oil|Capacity Specifications|Page 1142 > < Engine Oil|Capacity Specifications|Page 1140
Page 1
background image

Engine Oil: Service and Repair

Draining and filling in engine oil (changing engine oil)

Preliminary work

1. Jack up the vehicle at the points provided.
2. Remove engine underbody panelling.

Draining and filling in engine oil

Notice
Incorrect oil level
*

Risk of damage to engine or catalytic converter

-> Check the oil level regularly.
-> The oil level must not fall below the Minimum marking or rise above the Maximum marking.
-> Only use approved engine oils.

Warning
Hot fluid
*

Danger of scalding

-> Avoid contact with hot fluid.
-> Wear personal protective gear.

Information
The tightening specifications for the basic engine are stored centrally. Tightening torques and assembly instructions for other affected assemblies (e.g.
chassis, electrics, transmission or body) or for peripheral engine equipment can be found in the corresponding documents.

1. Loosen the oil drain plug -1- and collect the engine oil in a container (allow to drain for approx. 5 minutes). Dispose of waste oil in accordance

with legal requirements.

Engine Oil|Capacity Specifications|Page 1142 > < Engine Oil|Capacity Specifications|Page 1140