Panamera S (970) V8-4.8L (2010)
/v8-4.8l/Page-811002.png)
1. Push electric connector onto AWS control unit until it is felt to engage.
2. Position AWS control unit on the holder and screw it down with the two fastening screws -1- .
Subsequent work
Subsequent work for AWS control unit
1. Install memory seat adjustment control unit.
2. Install right front seat.
3. Connect the battery and carry out work instructions after disconnecting the battery.
4. If the AWS control unit was replaced, the new AWS control unit must be taught and calibrated.
