18I/Sportwagon L4-2165cc 2.2L (1985)
Ignition Switch: Service and Repair
Fig. 3 Ignition switch tumbler removal
1.
Disconnect battery ground cable.
2.
Remove steering wheel.
3.
Remove the combination lighting-direction indicator switch shell.
4.
Remove wiring junction plug.
5.
Turn key to (G) ``garage'' position and remove key.
6.
Remove retaining screw.
7.
Push in retaining pin with a punch and push the switch out from behind.
8.
Insert key and turn the key to the (S) ``stop'' position.
9.
Remove key to free locking tumbler, Fig. 3.
10.
Remove two screws on the rear of the switch.
11.
Pull the switch apart.
12.
Reverse procedure to install.
