Alliance/Encore L4-1721cc 105 CID (1985)
FIGURE 30
Tighten each bolt to an initial torque of 10 N-m (88 in.lbs.) in the sequence shown in Figure 30.
Final tighten bolts 1-10 to 20 N-m (15 ft.lbs.) torque.
Retighten bolts 11-12 to 10 N-m (88 in.lbs) torque.
FIGURE 31A
FIGURE 31B
8.
Lubricate the replacement camshaft oil seals with engine oil. Then install the front seal with tool Mot. 988.01 and the rear seal with tool Mot. 1010
(Fig. 31).
