Alliance/Encore L4-1721cc 105 CID (1985)
b.
Paint a second timing reference mark
(17)
on the belt in line with the crankshaft sprocket timing mark (18).
FIGURE 10
16.
Loosen the camshaft timing belt tensioner lock nut to release belt tension and remove the timing belt.
17.
Disconnect the CCV hose (19) at the oil separator (20) (Fig. 10).
18.
Disconnect the knock sensor electrical connector (21), accelerator cable (22) and the mounting clamp (23) (Fig. 10).
FIGURE 11
19.
Disconnect the MAT sensor connector (24), throttle body fuel lines (25), fuel injection connector (26), WOT switch connector (27), TPS
connector (28) and the heater hose
(29) (Fig. 11).