Alliance/Encore L4-1721cc 105 CID (1985)
Wide Open Throttle (WOT) Switch: Service and Repair
Renix Throttle Body Fuel Injection (TBFI), Early Type System
Wide Open Throttle Switch
Fig. 9 Replacing wide open throttle switch
1.
Remove air filter.
2.
Disconnect throttle return spring.
3.
Disconnect throttle cable.
4.
Remove ISA bracket to throttle body screws.
5.
Disconnect electrical connectors from WOT (1) and ISC (2), Fig. 9.
6.
Remove bracket, ISC, and WOT assembly from throttle body.
7.
Remove ISC.
8.
Remove two WOT to bracket screws.
9.
Remove WOT.
10.
Reverse procedure to install.
Adjustments
Refer to ``Inline 4 Cylinder Engine Tune Up'' for idle speed adjustments.
FUEL PRESSURE REGULATOR
Adjustment is only necessary after a replacement pressure regulator has been installed.
1.
Remove air filter.
