Alliance/Encore L4-1721cc 105 CID (1985)
Fig. 5 Aligning locating peg of strut cushion with lower cup.
16.
Install washer (4) and component (2) with its plastic spring thrust cup, noting locating peg (B), Fig. 5.
17.
Install washer and nut, then remove tool Sus. 863 and torque piston rod nut to 44 ft.lbs.
18.
Install spring and shock absorber assembly on vehicle by pressing lower suspension arm down so that shock absorber does not contact driveshaft
boot.
19.
Install two shock absorber top mounting bolts and torque to 17 ft.lbs.
20.
Install two bottom mounting bolts and nuts with nuts toward front of vehicle and torque nuts to 55 ft.lbs.
21.
Install wheel and lower vehicle.
