Alliance/Encore L4-1721cc 105 CID (1985)
7.
Install the remaining filter bolt and washer in the location shown in Figure 4.
8.
Install a new valve body bolt PN J3001607 and spacer PN J5001254 in the location shown in Figure 4.
9.
Tighten the three oil filter bolts to << 9 N-m (80 in.lbs.). >>
10.
Reposition the oil pan magnets in the bottom of the oil pan to provide adequate clearance between the filter/screen oil pick up and the oil pan.
NOTE:
BE SURE THE GROOVED SIDE OF THE MAGNETS FACE THE BOTTOM OF THE OIL PAN.
11.
Install the oil pan, tighten the retaining bolt to << 6 N-m (54 in. lbs.). >>
12.
Fill the transmission with the specified ATF.
POLICY:
For information only.