Fuego L4-1565cc 95 CID (1983)
Crankshaft Position Sensor: Technical Service Bulletins
Ignition System - IEI TDC Sensor Test Specifications
8E072
OCTOBER 1983
FUEGO TURBO MODELS
ELECTRICAL
Attention: Workshop, Parts Department.
IEI IGNITION TDC SENSOR TEST SPECIFICATIONS
Information
The TDC sensor resistance test specifications for Fuego Turbo models with IEI ignition outlined in the M.R. 238 manual have been updated.
The resistance test specifications of 150 ohms +/- 50 ohms is valid only when the sensor is tested at room temperature and off the vehicle.
The resistance specification for testing the sensor on the vehicle and when hot (100~C/212~F) is 200 ohms - 75 ohms.
Filing Instructions
Make a note of this information on page C-20 of the M.R. 238 manual and file this I.S. Note in the binder supplied with the manual.
