Fuego L4-1647cc 100 CID (1982)
Engine: Specifications
Cylinder Head Tightening Specifications
Fig. 5 Cylinder head tightening sequence
Lubricate cylinder head bolts and washers with engine oil, then torque bolts in sequence shown in Fig. 5 to 57-61 ft.lbs.
Run engine until cooling fan goes on, shut engine off and allow it to cool for at least 2-1/2 hours, then retighten cylinder head as follows:
a. Unscrew bolt No. 1 one half turn and torque to 57-61 ft.lbs.
b. Repeat above step for each bolt in sequence.
