Fuego L4-1647cc 100 CID (1982) Automatic Transmission: Drive Axle Torque Specs
Automatic Transmission/Transaxle: Technical Service Bulletins
A/T - Drive Axle and Wheel Lug Nut Torque Specifications
TECHNICAL BULLETIN # 294
DATE: 1995
TRANSMISSION: General
SUBJECT: Drive Axle and Wheel Lug Nut Torque
APPLICATION: Service information
AXLE AND LUG NUT SERVICE INFORMATION
It is critical to tighten the axle and lug nuts to factory specifications.
Important:
The following charts contain both DRIVE AXLE NUT and WHEEL LUG NUT tightening values. Make certain the correct tightening torque is used
by referring to the chart headings.
WARNING
If the factory tightening specifications are not followed, bearing life will be shortened or mechanical loads will not be spread evenly.
^
Install axle(s) and wheel(s).
^
Install nuts and hand tighten.
^
Lower vehicle until wheels begin to touch the ground.
