Fuego L4-2165cc 2.2L (1984)
Control Arm Bushing: Service and Repair
1.
Remove lower control arm.
2.
Press one bushing out, using suitable press and spacer. Bushings must be replaced one at a time so they are properly spaced in relation to the
center line of the suspension arm.
3.
Lubricate and install new bushing. Install so that distance between bushings is 5.77-5.81 inches for Alliance, Encore and GTA, or 7.126 for Fuego
and Sportwagon.
4.
Install second bushing following same procedure as for the first.
